3.8. Check of brushes of screen wipers

Check of brushes of screen wipers (each 400 km or weekly)

 PERFORMANCE ORDER

1. Clear brushes of screen wipers and a windshield by means of solution of the concentrated glass cleaning liquid or methyl alcohol. Similarly clear lenses of headlights and an edge of cleaners of headlights.
2. Check a condition of brushes; if on brushes there are cracks or signs of damages or if the cleared surface of glass remains polluted, replace brushes. For ensuring the maximum transparency of a windshield of a brush of a windshield have to by itself be replaced annually. At the same time it is necessary to examine brushes of a cleaner of headlights (where they are available) and if necessary to make their replacement.

3. For removal of brushes of a screen wiper of glass of a back door pull the lever from glass against the stop. Turn a brush on 90P, press a finger a blocking ear and remove a brush from the bent end of the lever. For installation into place make sure that the brush is strongly fixed on the lever.

4. For removal of a brush of a cleaner of headlights delay the headlight cleaner lever from headlight glass, then shift a brush down to that time until it completely separates from the lever. At installation make sure that the brush is strongly fixed on the lever.


Make sure that nozzles of windscreen washers of a windshield function normally and send a stream of cleaning liquid to the top part of the area of glass cleared by brushes. If necessary, for change of control snuffled use a hairpin.