10.3. Removal and installation to the place of a coupling pedal

Models with the right steering and models with the left steering till 1994 of the issue.

Removal

 PERFORMANCE ORDER

1. Remove the sound-proof panel under the forward panel under a steering column (The head Body works).
2. Disconnect a pusher of the main cylinder from a coupling pedal (appropriate sections of the Head Remont of the engine).
3. For ensuring access to support of a pedal remove screws and lift a bracket of the holder of the switch of system of a tempostat.
4. Squeeze out a pedal up to the end, then remove a lock-nut from the end of an axial bolt of a pedal.
5. Unhook a spring from an adjusting bracket of a pedal and remove it together with the plastic reel.

Installation into place

Installation is into place made as it should be the return to a removal order. Establish a new lock-nut of an axial bolt and tighten it with the required effort.

Models with the left steering after 1994 of the issue.

Removal

In this case there is no need to disconnect hydraulic hoses from the main cylinder.


 PERFORMANCE ORDER

1. Remove the sound-proof panel under the forward panel under a steering column (The head Body works).
2. Working according to Sections of the Head Remont of the engine, disconnect the main cylinder from an adjusting bracket of a pedal.
3. For ensuring access to support of a pedal give screws and remove a bracket of the holder of switches of system of a tempostat.
4. Squeeze out a pedal and remove a lock-nut from the end of an axial bolt.
5. In a point of fastening of a returnable spring to a shaft of a pedal remove a clip from the end of a finger and remove a spring together with a bracket.
6. Remove the electronic actuation device (ECU) of the uniform lock from its fixing point under the forward panel, having given for this purpose a clip from a molding of the forward panel. Shift the device aside so that it did not prevent work.
7. Push a pedal towards the forward panel up, then remove it from an axial bolt and take out from the car.

Installation into place

Installation is into place carried out as it should be the return to a removal order taking into account the next moments:

   a) At installation of the main cylinder on a basic bracket of a pedal tighten fixture with the required effort.
   b) Establish a new lock-nut of an axial bolt and tighten it with the required effort.