9.9. Removal and installation to the place of the electromagnetic valve (DI/APC system)

The electromagnetic valve is installed only on the models equipped with a turbocompressor.



1. The valve is installed on a bracket in a forward right part of a motive compartment under the ignition coil for systems not Trionic or on a forward beam of a motive compartment for the Trionic systems.
2. Disconnect the electric socket.
3. Disconnect hoses from the valve.
4. Give fixing screws and take out the valve from a motive compartment.

Installation into place

Installation is into place carried out as it should be the return to a removal order.