8.10. Removal and installation to the place of a starter



1. The starter is located in the left back part of the engine and приболчен to a back plate of the engine and transmission. At first disconnect a negative wire of the battery.
2. Cock the emergency brake and a poddomkratta a car front, having established it on axial support (address Poddomkrachivaniye's Section, towage and change of wheels).
3. Give a nut and disconnect the wire going from a positive pole of the battery to the plug of the electromagnetic actuator.
4. On the B204 and B234 engine you otboltit the holder of a positive cable from a rack of the inlet pipeline.
5. Give the lower fixing nut of a starter.
6. Then an otboltita also remove a rack of the inlet pipeline. In the top part of a rack there is a cut therefore there is no need completely to remove a bolt on the pipeline.
7. Give a nut and disconnect a wire of the electromagnetic actuator from the plug.
8. Give the top fixing bolt of a starter, then lower a starter, having taken out it from a motive compartment.

Installation into place

Installation is into place made as it should be, the return to a removal order. Strongly delay all electric contacts of wires.