6.2. Removal and installation to the place of assembly of the air cleaner

Removal

 PERFORMANCE ORDER

1. Weaken a collar and disconnect an inlet sleeve from an air cleaner cover.
2. Give bifurcate springs and clips and uncover the air cleaner.
3. Take out an air cleaner element (if necessary see the Head Routine maintenance). On models of system of injection of LH-Jetronic fuel take an element from the lower case. On models with a control system of the Trionic engine take out an element from the cylindrical case.
4. Give fixing screws and take out the air cleaner case from a motive compartment, if necessary disconnect a sleeve of the soaked-up air.

Installation into place

Installation is into place made as it should be, the return to a removal order.