6.12. Removal and installation to the place of the sensor block

Before starting the procedure, read the preventions given at the end of the Section the General information and precautionary measures.



1. Disconnect a negative wire of the battery.
2. For ensuring access to the block of the sensor put pillows of a back seat forward (if it is necessary).
3. Remove the panel of half of the luggage compartment, then, having turned on a quarter of a turn by means of a hexagon key clamps, uncover with fuel the tank.
4. Disconnect plugs from the fuel measuring instrument sensor block, having remembered their provisions.
5. The block fastens the screwing-up cover. For a vyvinchivaniye of a cover of the equipment of SAAB use the special tool, however the similar result can achieve by means of big flat-nose pliers.
6. Take the sensor from the top part of the fuel tank, you watch to spilling fuel in the car. Remove a rubber sealing ring. Check a condition of a sealing ring, if necessary prepare new.

Installation into place

Installation is into place made as it should be, the return to a removal order.