2.32. Tempostat (cruise control)

It is not necessary to apply темпостат on the wet and slippery road, at the heavy city traffic and on twisting roads.

If you are not going to apply темпостат, install the switch in position of OFF it (is switched off). If the switch remains in position of ON, "темпостат" can be involved inadvertently.

Some models are equipped tempostaty.

Switches of a tempostat


Control of system is exercised by means of the switch having the following provisions: OFF (the system is switched off); TIP (temporary change of speed); ON (the system is included); RESUME (repeated inclusion); SET (installation of desirable speed of the movement).
The CRUISE indicator on the dashboard burns at position of the ON switch and does not burn at provisions of OFF and TIP.

Installation of desirable speed of the movement

Install the switch in position of ON. Bring speed to desirable value (the minimum value of speed for action of "tempostat" - 40 km/h) and press the SET key.

Increase in desirable speed of the movement

Bring speed to desirable value and press the SET key. It is also possible to increase speed by means of the SET key. When pressing the SET key speed increases steps on 1.6 km/h.

Temporary increase in speed

The system allows to increase temporarily speed, for example, for overtaking. At an accelerator pedal otpuskaniye the system reduces speed to a preset value.

Reduction of speed

Tempostat is disconnected when pressing pedals of a brake or coupling. Smooth reduction of speed is possible by means of moving of the switch to position of TIP.

However, system it is possible again to force to work by means of installation of the switch in situation RESUME, speed decreases steps on 1.6 km/h.

Switching off of system

Tempostat is switched off in the following cases:

— when pressing a pedal of a brake or coupling
— at transfer of the switch to position of TIP
— at transfer of the switch to position of OFF
— at switching off of the engine.