17:16. Removal and installation to the place of components of system of windscreen washers of a windshield, glass of a door of a back and lenses of the main headlights

Nozzles of windscreen washers of a windshield, glass of a door of a back and lenses of the main headlights, eat from one electric pump which is installed on the tank of omyvatelny liquid.

The installation site of the tank of omyvatelny liquid depends on a year of release of the car. On early models the tank is screwed on the left mudguard ahead of the battery pallet. On late models the tank is installed in a cavity of the right wing in a forward part of an arch of a wheel.

Pump of windscreen washers

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire of the battery and shift it from the plug aside.
2. On early models remove a loker of an arch of the right wheel (address the Section Removal and installation to the place of external elements of finishing of a body).
3. Disconnect from port on a pump casing a liquid supply hose. Prepare for a certain passage of liquid at a hose detachment.
4. Disconnect a motor cable from the electric socket.
5. Remove the pump slightly having weakened its landing in the tank and, then take it from the rubber sealing plug. In case liquid level is in the tank higher than the level of the sealing plug prepare for collecting the spilled liquid, having established for this purpose under the plug the capacity of suitable volume.

Installation into place

Installation of windscreen washers is into place carried out as it should be, the return to a removal order.

Windshield windscreen washer nozzles

 PERFORMANCE ORDER

1. Open a cowl and disconnect a hose from a back part of a nozzle of windscreen washer.
2. By means of the plastic tool or the screw-driver with a flat sting which is wrapped up by a polyvinylchloride tape for protection of the painted surfaces take a washer nozzle from an opening in a cowl.

Installation - as it should be the return to a removal order.

Back door glass windscreen washer nozzle

 PERFORMANCE ORDER

1. Separate a lens of brake fire of the top level and a molding of a cover from assembly of the boss.
2. Remove from a casing in assembly of the boss a windscreen washer nozzle molding.

Installation - as it should be the return to a removal order.

Nozzle of windscreen washer of the main headlight

Nozzles of windscreen washer of the main headlights are built in levers of screen wipers of lenses of the main headlights (the procedure of removal of levers look in the Section Removal and installation to the place of levers of screen wipers of a windshield, glass of a door of a back and the main headlights).