17:14. Removal and installation to the place of levers of screen wipers of a windshield, glass of a door of a back and the main headlights

Levers of screen wipers of a windshield

 PERFORMANCE ORDER

1. Remember the provision of brushes screen wipers of a windshield in their initial state. Mark this situation on glass by means of an insulating tape.
2. Lift the plastic cover established on loops in the screen wiper lever basis, at the same time access to a fixing nut will open.
3. Weaken and remove a nut, then remove the lever.
4. At installation into place, track that the split driving spindle entered an adjusting opening of the lever of a screen wiper so that the brush fell into the same state on a windshield, as before removal (marked with an insulating tape). Tighten a fixing nut and latch a plastic cover.

Back door glass screen wiper lever

The procedure is similar to the procedure described in the previous subsection for a windshield.

Levers of screen wipers of the main headlights

 PERFORMANCE ORDER

1. Remember the provision of brushes of screen wipers on lenses of the main headlights in an initial state. For confidence note this situation on lenses by means of an insulating tape.
2. Unsnap, the plastic cover established on loops in the lever basis - for ensuring access to a fixing nut.
3. Holding couple of clips a driving spindle from rotation, weaken and remove a fixing nut, then remove the lever.
4. At installation into place you watch that the driving spindle entered an adjusting opening on the screen wiper lever so that the brush appeared in the same (placed by an insulating tape) situation on a lens of the main headlight, as before removal. Strong tighten a fixing nut and latch a plastic cover.