17:13. Removal and installation to the place of horn components

Press buttons of a horn

 PERFORMANCE ORDER

1. Disconnect a negative wire of the battery and shift it from the plug aside.
2. By means of the plastic tool take the horn button from a spoke of a steering wheel and remove the top electric contact.
3. Remove the fixing screw and remove the lower electric contact.
4. Examine both contacts regarding detection of signs of wear and corrosion, if necessary replace contacts.

Installation is into place carried out as it should be, the return of removal.

Horn horns

 PERFORMANCE ORDER

1. Disconnect a negative wire of the battery and shift it from the plug aside.
2. Remove a forward lattice (The section Removal and installation to the place of a cowl and a forward lattice).
3. Disconnect the electric socket of a plait of wires from a horn.
4. Weaken and take a fixing nut on the lower part of a bracket of a horn and remove horns.

On early models the second horn is established in a motive compartment in an arch of the left wheel.