17:10. Removal and installation to the place of the module of hours / the traveling computer

Carried out by the module of hours / the traveling computer of function depend on concrete model of the car, however procedures of removal and installation of the module into place remain the same.

For ensuring access to the module the top panel ("Torpedo") can be removed without the need for removal of all assembly of the forward panel.

The panel of the EDU display is a part of an instrument guard (information on removal you look in the Section Removal and installation to the place of an instrument guard).

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire of the battery and shift it from the plug aside.
2. Remove the top panel ("Torpedo") (see paragraphs of the Section Removal and installation to the place of assembly of the forward panel ("Torpedo")).
3. Remove the air sleeve (The head of the Cooling system, heating) passing over an instrument guard.
4. Slightly press on a back part of the module for release it from "Torpedo".
5. Disconnect cable sockets from a back part of the module, having marked them for the purpose of simplification of the subsequent assembly.

Installation into place

Installation of the module of hours / the traveling computer is made as it should be, the return to a removal order. Track that cable sockets were installed into place according to the tags made in the course of removal and are strongly fixed in nests.