16.9. Removal and installation to the place of a rope of opening of a cowl

Removal

 PERFORMANCE ORDER

1. Remove a forward lattice (address the Section Removal and installation to the place of a cowl and a forward lattice).
2. Remove the block of the right index of turn (The head Sistema of electric equipment).
3. Under locks of a cowl exempt lock nipples from internal inserts of a rope of opening of a cowl on each lock.
4. Unscrew a rope clip over the block of a right headlight.
5. Remove the clips fixing a lengthening rope to a bottom of a forward beam.
6. In interior of the car remove the plate protecting from deleting a threshold of a door of the driver, and the finishing panel around the handle of opening of a cowl. Take clamps and lower the sound-proof panel, having removed it from the inside of a steering column / lobby of the panel ("Torpedo").
7. Wring out a clip and release an overlay of a rope from a stopper. Pull a rope towards the handle and disconnect from it the rope insert nipple.
8. Involve all rope in interior of the car. In a case emergence of difficulty at extraction of a rope, access to it can be improved by a poddomkrachivaniye of the car and removal of the right forward wheel (address Poddomkrachivaniye's Section, towage and change of wheels, and then removals of an internal loker of a wing (address the Section Removal and installation to the place of external elements of finishing of a body).

Installation into place

Installation of a rope is into place carried out as it should be, the return to a removal order. Adjust both stoppers of a rope on cowl locks so that locks unambiguously opened at involvement of the handle of opening of a cowl. Make sure also that when the handle is in a starting position, the cowl is reliably fixed by locks from both parties; for check strongly pull each corner of a cowl. If necessary adjust length of a shock finger (address the Section Removal and installation to the place of the cowl lock).