| 1. Remove the ignition switch / the blocking lock of steering system and assembly of a steering column. |
| 2. Remove washers from a casing of the lower bearing. |
|
3. Remove a casing from a bracket of the holder and push out the bearing.
4. Grease the new bearing with a small amount of universal lubricant, then push it in a casing.
5. Establish a casing into place on the holder's bracket, having put at the same time new washers, and strong tighten bolts.
6. Put into place the ignition switch / the blocking lock of steering system and assembly of a steering column. |
|