15:11. Removal and installation to the place of a cross bar of a back suspension bracket

Removal

 PERFORMANCE ORDER

1. Park the car on the flat platform, prop up forward wheels and establish a transmission control lever in the provision of the first transfer (the manual transmission) or the selector lever in situation "P" (automatic transmission).
2. A back part of the car also establish to Poddomkratta it on axial support. For ensuring access you can remove back wheels though it is not obligatory.
3. Weaken and take two bolts of a cross bar. At first on a pipe of an axis and then on a suspended bracket on the car bottom.

4. Remove a bar from the car, remove plugs.
5. Check a bar regarding detection of signs of deformation, damages and serious corrosion. Examine plugs regarding detection of signs of wear or damage; at considerable wear or deformation when aging rubber - replace them.

Installation into place

Installation is into place made as it should be, the return to a removal order.